Yaesu FT-950, Руководство по эксплуатации, Страница: 90 / 132

Page 88 FT-950 O
PERATING
M
ANUAL
CTCSS T
ONE
F
REQUENCY
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4
88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 251.4
FM M
ODE
O
PERATION
R
EPEATER
O
PERATION
The FT-950 may be utilized on 29 MHz and 50 MHz repeaters.
1. Rotate the Main Tuning Dial knob to the output fre-
quency (downlink) from the repeater.
2. If CTCSS Tone operation is desired/needed, press and
hold in the [ AM/FM
] button for one second to engage
the CTCSS mode.
3. Rotate the Main Tuning Dial knob to select the desired
CTCSS mode. If you just need to send the uplink en-
coding tone, select “
TN TN
TN TN TN
.” For encode/decode opera-
tion, choose “
TS TS
TS TS
TS
” instead. The available choices are
“
OFF OFF OFF OFF OFF
” Æ “
TN TN TN TN TN
(Tone Encoder)”
Æ “
TS TS
TS TS TS
(Tone Squelch)” Æ “
OFF OFF
OFF OFF OFF
”.
4. Rotate the [ CLAR/VFO-B
] knob to select the desired
CTCSS Tone to be used. A total of 50 standard CTCSS
tones are provided (see the CTCSS Tone Chart).
5. Press the [ AM/FM
] Mode button to select the desired
repeater shift direction. The selections are:
“
S S
S S S
” Æ “
+ +
+ + +
” Æ “
– –
– – –
” Æ “
S S
S S S
”
where “
S S S S S
” represents “Simplex” operation (not used
on a repeater).
6. Press and hold in the [ AM/FM
] button for one second
to exit from the repeater setup mode.
7. Close the microphone’s PTT switch (or press the
[
MOX
] button) to begin transmission. You will observe
that the frequency has shifted to correspond to the pro-
gramming you set up in the previous steps, and a “
T TT T T
”
notation will appear on the “10 Hz” frequency digit
while transmitting. Speak into the microphone in a
normal voice level. Release the
PTT switch or [ MOX
]
button to return to the receive mode.
A
DVICE
:
ˆ The Repeater operation will be memorized indepen-
dently on each VFO stack of the VFO-A and VFO-B.
ˆ
The conventional repeater shift used on 29 MHz is 100
kHz, while on the 50 MHz band the shift may vary
between 500 kHz and 1.7 MHz (or more). To program
the proper repeater shift, use Menu items “
057 F3E 057 F3E 057 F3E 057 F3E 057 F3E
28 RPT 28 RPT
28 RPT 28 RPT 28 RPT
” (28 MHz) and “
058 F3E 50 RPT 058 F3E 50 RPT
058 F3E 50 RPT 058 F3E 50 RPT 058 F3E 50 RPT
” (50
MHz), as appropriate.
[MODE] Button
[CLAR/VFO-B] Knob
Main Tuning Dial Knob
[MOX] Button
CTCSS Tone Frequency
CTCSS Operation
TN TN TN TN TN
: Tone Encoder
TS TS
TS TS TS
: Tone Squelch
OFF OFF
OFF OFF
OFF
: OFF
Repeater Shift Direction
– – – – –
: Minus Shift
+ + + + +
: Plus Shift
S S
S S
S
: Simplex