Yaesu FT-950, Руководство по эксплуатации, Страница: 81 / 132

Page 79 FT-950 O
PERATING
M
ANUAL
CW C
ONVENIENCE
F
EATURES
C
ONTEST
M
EMORY
K
EYER
C
HECKING THE
CW M
EMORY
C
ONTENTS
1. Be sure that Break-in is still turned “Off” by the
[
BK-IN
] button.
2. Press the [
MONI
] button to enable the CW monitor. A
“ ” icon will appear in the display.
3. Press and hold the [ SELECT
] knob for one second to
activate the Contest Memory Keyer. You will see one
of following indications in Multi-Display Window on
the display; “
rEC1 rEC1 rEC1 rEC1 rEC1
”, “
rEC2 rEC2 rEC2 rEC2 rEC2
”, “
rEC3 rEC3 rEC3 rEC3 rEC3
”, “
rEC4 rEC4 rEC4 rEC4 rEC4
”, “
rEC5 rEC5 rEC5 rEC5 rEC5
”,
“
PLY1 PLY1 PLY1 PLY1 PLY1
”, “
PLY2 PLY2 PLY2 PLY2 PLY2
”, “
PLY3 PLY3 PLY3 PLY3 PLY3
”, “
PLY4 PLY4 PLY4 PLY4 PLY4
”, or “
PLY5 PLY5 PLY5 PLY5 PLY5
”.
4. Rotate the [ SELECT
] knob to select the CW Memory
Register (“
PLY1 PLY1 PLY1 PLY1 PLY1
” through “
PLY5 PLY5 PLY5 PLY5 PLY5
”)
in which you wish to check the mes-
sage.
5. Press the [ SELECT
] knob momentarily. You will hear
the results in the sidetone monitor, but no RF energy
will be transmitted.
O
N
-T
HE
-A
IR
CW M
ESSAGE
P
LAYBACK
1. Press the [ BK-IN
] button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item “
043 A1A BK-IN 043 A1A BK-IN 043 A1A BK-IN 043 A1A BK-IN 043 A1A BK-IN
.”
2. Press and hold the [ SELECT
] knob for one second to
activate the Contest Memory Keyer. You will see one
of following indications in Multi-Display Window on
the display; “
rEC1 rEC1
rEC1 rEC1 rEC1
”, “
rEC2 rEC2
rEC2 rEC2 rEC2
”, “
rEC3 rEC3
rEC3 rEC3 rEC3
”, “
rEC4 rEC4
rEC4 rEC4 rEC4
”, “
rEC5 rEC5
rEC5 rEC5 rEC5
”,
“
PLY1 PLY1 PLY1 PLY1 PLY1
”, “
PLY2 PLY2 PLY2 PLY2 PLY2
”, “
PLY3 PLY3 PLY3 PLY3 PLY3
”, “
PLY4 PLY4 PLY4 PLY4 PLY4
”, or “
PLY5 PLY5 PLY5 PLY5 PLY5
”.
3. Rotate the [ SELECT
] knob to select the CW Memory
Register (“
PLY1 PLY1
PLY1 PLY1 PLY1
” through “
PLY5 PLY5
PLY5 PLY5 PLY5
”)
that you wish to transmit.
4. Press the [ SELECT
] knob momentarily. The pro-
grammed message will be transmited on the air.
[BK-IN] Button
[SELECT] Knob
Multi-Display Window
[MONI] Button
Transmitting in the Beacon Mode
It is possible to transmit repetitively in a “Beacon” mode, any message programmed either via paddle input or via
the “Text” input method. The time delay between message repeats may be set anywhere between 1 and 255 seconds
via Menu item “
016 KEY BEACON 016 KEY BEACON 016 KEY BEACON 016 KEY BEACON 016 KEY BEACON
”. If you do not wish the message to repeat in a “Beacon” mode, please set this
Menu item to “
OFF OFF OFF OFF OFF
”.
To transmit the message:
1. Press and hold the [
SELECT
] knob for two sec-
onds to activate the Contest Memory Keyer. You
will see one of following indication in Multi-Dis-
play Window on the display; “
rEC1 rEC1
rEC1 rEC1 rEC1
”, “
rEC2 rEC2
rEC2 rEC2 rEC2
”,
“
rEC3 rEC3
rEC3 rEC3
rEC3
”, “
rEC4 rEC4
rEC4 rEC4
rEC4
”, “
rEC5 rEC5
rEC5 rEC5
rEC5
”, “
PLY1 PLY1
PLY1 PLY1
PLY1
”, “
PLY2 PLY2
PLY2 PLY2
PLY2
”,
“
PLY3 PLY3 PLY3 PLY3 PLY3
”, “
PLY4 PLY4 PLY4 PLY4 PLY4
”, or “
PLY5 PLY5 PLY5 PLY5 PLY5
”.
2. Rotate the [ SELECT
] knob to select the CW
Memory Register (“
PLY1 PLY1
PLY1 PLY1
PLY1
”
through “
PLY5 PLY5 PLY5 PLY5 PLY5
”) where the Bea-
con message is stored.
3. Press the [ SELECT
] knob momentarily. Repeti-
tive transmission of the Beacon message will be-
gin. Press the [
SELECT
] knob once more to halt
the Beacon transmissions.
N
OTE
:
Adjust the sidetone monitor level using the [
MONI
] knob.
N
OTE
:
If you subsequently decide to use the “Text Memory” tech-
nique for memory storage, please note that the contents of
a message stored using keyer paddle input will not be trans-
ferred over when you select “Text Memory technique” on
a particular memory register (the Menu Mode Setting is
set to “
tyP1 tyP1 tyP1 tyP1 tyP1
”).
[BK-IN] Button
[SELECT] Knob
Multi-Display Window
[MONI] Button
[SELECT] Knob
Multi-Display Window