Yaesu FT-950, Руководство по эксплуатации, Страница: 74 / 132

Page 72 FT-950 O
PERATING
M
ANUAL
Full Break-in (QSK) Operation
As shipped from the factory, the FT-950 TX/RX system for CW is configured for “Semi-break-in” operation.
However, using Menu item “
043 A1A BK-IN 043 A1A BK-IN
043 A1A BK-IN 043 A1A BK-IN
043 A1A BK-IN
,” you may change this setup for full break-in (QSK) operation, whereby
the switching is quick enough to hear incoming signals in the spaces between the dots and dashes of your transmis-
sion.
U
SING THE
B
UILT
-
IN
E
LECTRONIC
K
EYER
CW M
ODE
O
PERATION
1. Press the [
MENU
] button to engage the Menu.
2. Rotate the [ SELECT
] knob to select Menu item
“
043 A1A BK-IN 043 A1A BK-IN
043 A1A BK-IN 043 A1A BK-IN
043 A1A BK-IN
”.
A
DVICE
:
Press the [ SELECT
] knob momentarily to toggle
the Menu item display between “
043 A1A 043 A1A
043 A1A 043 A1A
043 A1A
” and
“
BK-IN BK-IN BK-IN BK-IN BK-IN
”.
3. Rotate the [ CLAR/VFO-B
] knob to set this Menu
item to “
FuLL FuLL FuLL FuLL FuLL
”.
4. When your adjustments are complete, press and
hold in the [ MENU
] button for one second to save
the new setting and exit to normal operation.
A number of interesting and useful features are available during Electronic Keyer operation.
1. Press the [
MENU
] button to enter the Menu mode.
2. Rotate the [ SELECT
] knob to select Menu item
“
046 A1A WEIGHT 046 A1A WEIGHT
046 A1A WEIGHT 046 A1A WEIGHT
046 A1A WEIGHT
”.
A
DVICE
:
Press the [ SELECT
] knob momentarily to toggle
the Menu item display between “
046 A1A 046 A1A
046 A1A 046 A1A
046 A1A
” and
“
WEIGHT WEIGHT WEIGHT WEIGHT WEIGHT
”.
3. Rotate the [ CLAR/VFO-B
] knob to set the weight
to the desired value. The available adjustment range
is for a Dot/Dash ratio of 2.5 ~ 4.5 (default value:
3.0).
4. When you are finished, press and hold in the
[
MENU
] button for one second to save the new
setting and exit to normal operation.
[CLAR/VFO-B] Knob [MENU] Button
[SELECT] Knob
Setting the Keyer Weight (Dot/Dash) Ratio
This Menu item may be used to adjust the dot/dash ratio for the built-in Electronic Keyer. The default weighting is
3:1 (a dash is three times longer than a dot).
[CLAR/VFO-B] Knob [MENU] Button
[SELECT] Knob