Yaesu FT-950, Руководство по эксплуатации, Страница: 34 / 132

Page 32 FT-950 O
PERATING
M
ANUAL
O
PERATION ON
60-M
ETER
(
5 MH
Z
)
B
AND
(
U.S.
VERSION ONLY
)
The FT-950 includes the capability for transmission and reception on the five spot frequencies assigned to the Amateur
Service in the United States. To operate on the 5 MHz band:
1. Press the [ V/M
] button once to enter the “Memory”
mode; the “ ” icon will appear in the display and a
memory channel number will appear on the Multi-Dis-
play Window in the display.
A
DVICE
:
If you can not enter the “Memory” mode, check to see
if the transceiver is in VFO-B mode (the green [(
VFO-
B
)
RX
] Indicator/Switch is illuminated). If so, press the
[(
VFO-A
)
RX
] Indicator/Switch to return operation to
VFO-A. Now, press the [ V/M
] button to enter the
“Memory” mode.
2. Press the [ MCH
] button located on the bottom right of
the [ CLAR/VFO-B
] knob. The LED imbedded in the
button will glow orange to signify that rotation of the
[
CLAR/VFO-B
] knob will allow selection of the
memory channel.
3. Memory channels “
US1 US1
US1 US1 US1
” through “
US5 US5
US5 US5 US5
” are pre-pro-
grammed, at the factory, with the permitted frequen-
cies in the 5 MHz band, and the USB mode is auto-
matically selected on these channels.
4. To exit from 60-meter operation and return to the VFO
mode, just press the [ V/M
] button.
N
OTE
:
The frequencies and operating mode for 5 MHz band op-
eration are fixed, and may not be changed.
B
ASIC
O
PERATION
:
R
ECEIVING ON
A
MATEUR
B
ANDS
[CLAR/VFO-B] Knob
[VFO-B(RX)] Button
[MCH] Button [V/M] Button
[VFO-A(RX)] Button
Main Tuning Dial Knob