Yaesu FT-7900R, Руководство по эксплуатации, Страница: 37 / 84

35 FT-7900R O
PERATING
M
ANUAL
Memory Recall
1. While operating in the VFO mode, press the [ V/M
(
MW
)]
key momentarily to enter the Memory mode.
2. Rotate the
DIAL
knob to select the desired channel. If
you press the [
MHz
(
PRI
)] key momentarily, then rotate the
DIAL
knob, you’ll be able to
scroll through the memory channels at a rate of 10 channels per click of the DIAL .
3. When selecting a memory channel that has an alpha-numeric “Tag” (label) appended,
press the microphone’s [ B
] key momentarily to switch
the Memory Channel display between the “Frequency”
format and “Alpha-numeric Tag” format.
4. To return to the VFO mode, press the [ V/M
(
MW
)] key momentarily again.
When the radio is already set to the Memory mode, an easy way to recall memories is to
enter the microphone’s key in the memory channel number. For example, to recall memory
channel #4, press
[
0
] [
0
] [
4
]
.
Memory Offset Tuning
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the “VFO” mode.
1. With the
FT-7900R
in the “MR” (Memory Recall) mode, select the desired memory
channel.
2. Now press the [ BAND
(
SET
)] key momentarily; the
“ ” icon will appear on the display.
3. Rotate the DIAL knob, as desired, to tune to a new fre-
quency. The synthesizer steps selected for VFO operation on the current band will be the
steps used during Memory Tuning.
4. If you press and hold in the [ SCAN
(
SEL
)] key for 1/2 second during Memory Tuning,
the data will now have been copied to VFO, although the original memory contents will
remain intact on the previously-stored channel.
5. If you wish to return to the original memory frequency, press the [ BAND
(
SET
)] key
momentarily. The “ ” icon will disappear.
M
EMORY
O
PERATION
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION