Yaesu FT-7900R, Руководство по эксплуатации, Страница: 29 / 84

27 FT-7900R O
PERATING
M
ANUAL
M
ANUAL
R
EPEATER
S
HIFT
A
CTIVATION
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press and hold in the [
BAND
(
SET
)] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #33 (
RPT.MOD RPT.MOD
RPT.MOD RPT.MOD
RPT.MOD
).
3. Press the [ BAND
(
SET
)] key momentarily, then rotate
the
DIAL
knob to select the desired shift among “
RPT.– RPT.–
RPT.– RPT.–
RPT.–
”,
“
RPT.+ RPT.+
RPT.+ RPT.+ RPT.+
”, and “
RPT.OFF RPT.OFF
RPT.OFF RPT.OFF RPT.OFF
.”
4. Press the [
BAND
(
SET
)] key momentarily to save the
new setting, then press and hold in the [
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press and hold in the [
BAND
(
SET
)] key for 1/2 second to enter the Set mode.
2. Rotate the
DIAL
knob to select Menu #39 (
SHIFT SHIFT
SHIFT SHIFT SHIFT
).
3. Press the [ BAND
(
SET
)] key momentarily, then rotate
the
DIAL
knob to select the new repeater shift magni-
tude. The shift must be a multiple of 50 kHz.
4. Press the [ BAND
(
SET
)] key momentarily to save the
new setting, then press and hold in the [ BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
If you just have one “odd” split that you need to program, don’t change the “de-
fault” repeated shifts using this Menu Item! Enter the transmit and receive fre-
quencies separately, as shown on page 34.
R
EPEATER
O
PERATION