12
FT-70DR/DE Advance Manual
Notification of a Call from a Remote Station by the Bell Function
The Bell may be set to sound an Alert when a call from another station containing a cor-
responding tone, DCS or pager code is received. “ ” icon on the LCD blinks to provide
a later notice of the call from the other station.
1. Press and hold the [
F
] key, rotate the
DIAL
knob to se-
lect the Set Mode [8 BELL].
2. Press the [
F
] key.
3. Rotate the
DIAL
knob to select the desired number of
times (1-20 times or continuous) the Bell rings.
OFF
1T
2T
20T
CONT (continuous)
4. Press the
PTT
switch to save the setting and return to
normal operation.
Bell icon
z
The default setting is “OFF”.
z
If setting the “CONT” (continuous), the bell keeps sounding until operating something.
User Programmed Reverse CTCSS Decoder
The tone signal frequency can be set at 100 Hz intervals between 300 Hz and 3000 Hz
to mute the audio when receiving a signal containing a CTCSS tone matching the pro-
grammed tone.
1. Press the [
F
] key, then press the [
5
](SQ TYP) key.
2. Rotate the
DIAL
knob to select the “PR FRQ”.
3. Press the
PTT
switch to save the setting and return to
normal operation.
4. Press the [
F
] key, then press the [
6
](CODE) key.
The setting screen containing the CTCSS tone frequen-
cies is displayed.
5. Rotate the
DIAL
knob to select the desired CTCSS
tone frequency.
6. Press the
PTT
switch to save the setting and return to
normal operation.
