Set up the Memory Programmer
How to Uninstall the Programming Cable Driver
If you wish to uninstall the SCU-35 Programming Cable driver, perform the following pro-
cedures:
1. Disconnect the SCU-35 Programming Cable from the computer.
2. Click [Start]
à
[Control Panel]
à
[Uninstall a program].
3. Click “PL- 2303 USB-to-Serial”, then click
[Uninstall].
4. Click [Next].
5. Click [Yes] to uninstall the SCU-35 program-
ming cable driver.
6. When uninstall is finished, the dialog box
shown to the right will open. Click [Finish] to
complete removal of the SCU-35 program-
ming cable driver.
6
FT-65R/E FT-25R/E Memory Programmer
