Yaesu FT-4VR, Руководство для продвинутых пользователей

Страница: 23 / 35

23
Tables of Set Mode Operations
No. Set Mode
item
Description
Selectable options
(Options in bold are the
default settings)
1 APO
Sets the length of time until the transceiver turns
off automatically.
OFF / 0.5 Hours – 12Hours
2 AR BEP Sets the beep option during ARTS operation.
OFF
/ INRANG / ALWAYS
3 AR INT Sets the polling interval during ARTS operation. 25 SEC / 15 SEC
4 BCLO Turns the busy channel lockout function ON/OFF. BCL.OFF / BCL.ON
5 BEEP
Sets the beep function on pressing the keypad, or
stopping the receiver scanning.
KEY+SC / KEY / OFF
6 BELL
Selects the number of CTCSS/DCS/PAGER/ARTS
Bell ringer repetitions.
OFF / 1 T / 3 T / 5 T / 8 T /
CONT
7 CWID
Turns the CW Identifier ON/OFF during ARTS op-
eration.
TX OFF / TX ON
8 CW WRT Sets the CW ID during ARTS operation.
ID= - - - - - - (6 characters)
default: blank
9 DC VLT Displays the voltage. (Voltage)
10 DCS.COD Sets the DCS CODE RX and TX.
104 DCS CODEs / OFF
default: 023 R / 023 T
11 DT DLY Sets the DTMF code transmission delay time.
50MS / 250MS / 450MS /
750MS / 1000MS
12 DT SET
Selects the DTMF auto dialer memory channel and
edits the DTMF code (Maximum 16 digits)
d1 – d9
13 DT SPD Sets the DTMF code transmission speed.
50MS
/ 100MS
14 EDG.BEP
Turns the the Band-edge beeper on/off.
while selecting the frequency via the [▲] or [▼]
key.
BEP.OFF / BEP. ON
15 LAMP Selects the LCD/Keypad Lamp mode.
5 SEC / 10 SEC / 30 SEC /
CONT / OFF
16 LED.BSY
Turns the TX/BUSY lamp ON/OFF while receiving
signals.
BSY ON
/ BSYOFF
17 LED.TX
Turns the TX/BUSY lamp ON/OFF while transmit-
ting signals.
TX ON / TXOFF
18 LOCK Configures the lock mode setting. LK KEY / LK PTT / LK P+K
19 M/T-CL Selects the function of the MONI/T-CALL switch.
MONI
*
/ TC1750
*
/ TC2100 /
TC1000 / TC1450
20 MEM.DEL Deletes the memory channel –
21 MEM.TAG Edits the memory channel tag. –
22 PAG.ABK Turns the pager answer back Function ON/OFF
ABK.OFF
/ ABK. ON
23 PAG.CDR Specifies a personal code (receive). 01 –
05 –
50, 01 –
47 –
50
24 PAG.CDT Specifies a personal code (transmit). 01 – 05 – 50, 01 – 47 – 50
25 PRI.RVT Turns the Priority Revert feature ON/OFF. RVTOFF / RVT ON
26 PSWD Turns the Password feature ON/OFF. PWD.OFF / PWD. ON
27 PSWDWT Inputs the password. (4 digits)