Yacht Devices YDAB-01, Руководство пользователя

Страница: 13 / 38

— 13 —
Device requires no maintenance. When deciding where to install Device, choose a dry mounting location.
Avoid places where the Device can be flooded with water, this can damage it.
1. Connecting to NMEA 2000
Device can be directly plugged into to the network backbone connector. YDAB-01N model can also be
connected via standard "DeviceNet NMEA 2000 Micro" drop cable. Before connecting the Device, turn
OFF the bus power supply. Refer to the following documentation if you have any questions regarding the
conenctors and other NMEA 2000 backbone components installation requirements:
• SeaTalk NG Reference Manual (81300-1) for Raymarine networks
• Technical Reference for Garmin NMEA 2000 Products (190-00891-00) for Garmin networks
Note that Device is powered from the NMEA 2000 backbone and consumes up to 1 Ampere during
the playback, thus it is recommended to conenct the Device close to the NMEA 2000 power cable or add an
extra power tap from the battery near the connection point.
After connecting the Device, close connection lock to ensure water resistance and reliability. Device has a
built-in LED which flashes red or green. After powering NMEA 2000 network ON, Device’s built-in LED
will start flashing (see Section VII).
2. Connection of the external button and LED
Figure 4. Button terminals and electrical scheme