Managing Initialization Parameters
DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET [LOAD] HOST
Specify the Internet address of the load host for DTFTP loading
The DEFINE [SERVER] CHASSIS SLOT INTERNET [LOAD] HOST
command specifies the Internet address of the host where the software load
image resides.
Notes
Use this command if DTFTP is enabled to load the software load image.
You must also specify the Internet address of the module or module set in
the chassis and the name of the file on the load host that contains the
software load image. If the module you specify reaches the load host
through a gateway, you must also specify the Internet address of the
gateway. Use the the other DEFINE CHASSIS SLOT LOAD INTERNET
commands to specify this information.
When you define the Internet address of the load host for DTFTP loading,
it appears in the Chassis Slot Loaddump Characteristics display.
Privilege
Level
Privileged
Syntax
DEFINE [SERVER] CHASSIS SLOT [list ] LOAD [record|ALL]
INTERNET [LOAD] HOST internet-address
Where
Means
[list ]
One or more chassis slot numbers in the range of 1-15. The slot numbers
you specify here must correspond to the slot numbers where the DTFTP
protocol is enabled. The local slot is the default.
One or more of the following initialization records:
PRIMARY
SECONDARY
TERTIARY
ALL
The PRIMARY initialization record is the default.
[record]
The Internet address of the host that contains the software load image.
internet-
address
0020
67
