Managing Initialization Parameters
Internet Load File
The Internet Load File field specifies the pathname and filename of the software load
image on the Internet Load Host. The processor module searches for this filename when it
uses the DTFTP protocol to obtain the software load image during initialization. The
following is an example of a command which specifies the Internet Load File in the
primary initialization record of the terminal server in slot 2:
Xyplex>> define chassis slot 2 load primary internet file
"/usr/xyplex/images/xpcsrv20.sys"
Resetting Initialization Parameters To Default Values
If you want to reset the values of parameters in an initialization record after you have
changed them, you can do so with one command, rather than resetting each value
individually. The following is the syntax of the command that resets all initialization
parameters to the defaults:
DEFINE CHASSIS SLOT [l ist] LOADDUMP [record|ALL] DEFAULT
The [record ] variable specifies the primary, secondary, or tertiary initialization record. If
the initialization record you specify is disabled by default, using this command also
disabled the initialization record. The following is an example of this command which
resets the secondary initialization record on a terminal server in slot 2:
Xyplex>> define chassis slot 2 loaddump secondary default
The secondary initialization record on a terminal server is disabled by default, so this
command resets parameters to default values and disables the initialization record.
0020
59
