![Xylem WTW UV 701 IQ SAC Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/xylem/wtw-uv-701-iq-sac/wtw-uv-701-iq-sac_instructions-manual_3898304021.webp)
UV 70x IQ SAC
Commissioning
21
ba77046e02
05/2017
3.4.4 Settings for virtual sensors
Carrying out
settings
Using <S>, switch from the measured value display to the main menu of the
settings. Then navigate to the setting menu (setting table) of the sensor. The
procedure is described in detail in your IQ S
ENSOR
N
ET
system operating
manual.
Default values are marked in bold.
Quit
-
The display switches to the next higher
level without storing the new settings.
Menu item
Settings
Explanations
Menu item
Settings
Explanations
Measuring mode
SAC 254, dissolved
SAC 254, total
UVT 254, total
CODds correl.
CODto correl.
TOC correl.
BOD correl.
DOC correl.
UVT 254, dissolved
The measured parameter is displayed
in the selected citation form.
Measuring range
-
Display of the measuring range
(see chapter 8 T
).
Cal - # raw value 1
Value pairs of the user calibration (see section 4.3.2).
Note: Leave those values unchanged during the initial commission
-
ing.
Cal - ref. value 1
Cal - # raw value 2
Cal - ref. value 2
Main sensor
Information that there are further sen
-
sor overlapping settings in the setting
menu of the relevant main sensor
(
Meas. interval
,
Cleaning duration Air
,
Signal smoothing
etc.).
Save and quit
-
The system confirms the saving of the
settings and the display switches to the
next higher level.
Содержание WTW UV 701 IQ SAC
Страница 1: ...OPERATING MANUAL ba77046e02 05 2017 UV 701 IQ SAC UV 705 IQ SAC OPTICAL SAC SENSOR...
Страница 2: ...2 ba77046e02 05 2017 UV 70x IQ SAC Copyright 2017 Xylem Analytics Germany GmbH Printed in Germany...
Страница 56: ...Appendix Glossary UV 70x IQ SAC 56 ba77046e02 05 2017...
Страница 57: ......