pHotoFlex
®
Turb
Operation
63
ba75976e07
09/2021
4.8.1 Storing measurement datasets
Proceed as follows to transmit to the data memory and simultaneously output
to the interface a measurement dataset:
If the memory is
full
You can erase the entire memory (see section 4.8.5), or overwrite the oldest
dataset with the next storing procedure.
A security prompt appears before a dataset is overwritten.
pH & ORP
:
Measured value (pH/mV)
Temperature value (°C/°F)
AutoRead info (
AR
)
AR
appears with the measured value if the AutoRead
criterion was met while storing (stable measured value).
Otherwise, the
AR
display is missing.
1 Press the
<STO>
key.
The
Store
display appears.
2 Using
<
V
> <
W
>
,
<START/ENTER>
and the number keys,
change and confirm the ID number (
ID
) as necessary (0 ...
999).
3 Using
<START/ENTER>
or
<STO>
, confirm
Store
.
The dataset is stored. The meter switches to the measured val-
ue display.
A measurement dataset is quickly stored by twice pressing
<STO>
. It is stored with the ID last set.
i
02.02.2005 11:24:16
0.00 mg/l PO4-P BV
PROG
1
ID
:
1
Store
(ID: 1)
Store
(
996
free
)
