Xylem WTW pH/Cond 3320, Руководство по эксплуатации

Страница: 59 / 82

pH/Cond 3320 Data storage
ba77054d01 02/2014
59
Settings You can configure the automatic data storage function with the following
settings:
Starting the auto-
matic storage func-
tion
To start the automatic storage function, select Continue with <

><

> and
confirm with <ENTER> . The meter switches to the measured value display.
The active automatic storage function can be recognized by the progress bar
in the function display. The progress bar indicates the remaining storage dura-
tion.
Energy saving mode
([Eco mode])
If the automatic storing function is active, the meter provides an energy saving
mode ([Eco mode]) to avoid unnecessary energy consumption. The energy
Menu item Possible set-
ting Description
ID number 1 ... 10000 ID number for the dataset series.
Interval 1 s, 5 s, 10 s,
30 s, 1 min,
5 min,
10 min,
15 min,
30 min,
60 min Storage interval.
The lower limit of the storage
interval can be restricted by the
number of free storage locations.
The upper limit is restricted by the
storage duration.
Duration 1 min ... x min Storage duration.
Specifies after which time the
automatic data storage should be
terminated.
The lower limit of the storage
duration is restricted by the stor-
age interval.
The upper limit is restricted by the
number of free storage locations.
1 Remaining storage duration
2 Graphical display of the storage duration
If the automatic storage function is activated, only the following
keys are active: Softkeys,
<M> , <STO__> and <On/Off> . The
other keys and the automatic switch-off function are deactivated.
1
2
pH
6.949
25.0
°C
0d03h00min
15.02.2014
14:15
0
14
Eco mode