Xylem WTW OxiTop-IDS Multi 3630 IDS, Руководство по эксплуатации

Страница: 90 / 118

Settings Multi 3630 IDS
90
ba77170e03 10/2017
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<ENTER>
key.
11.7.2 Resetting the system settings
The following system settings can be reset to the default status:
The resetting of the system settings is done in the menu Storage & config / Sys-
tem / Reset . To open the menu Storage & config in the measured value display,
press the <ENTER_> key.
Setting Default settings
Calibration interval 30 d
Measured parameter FNU
Auflösung 0.1
Setting Default settings
Language English
Acoustic signal on
Baud rate 4800 Baud
Output format ASCII
Decimal separator .
Brightness 15
Illumination Auto
Switchoff time 1 h
Temperature unit °C
Stability control on