Xylem WTW Multi 3430, Руководство по эксплуатации

Страница: 36 / 134

Multi 3430
Operation
36
ba75865e19 04/2015

when the automatic Stability control is switched off.
4.4.4 Automatic switch-off
The instrument has an automatic switchoff function in order to save the
batteries (see section 4.4.1). The automatic switchoff switches off the
measuring instrument if no key is pressed for an adjustable period.
The automatic switchoff is not active

if the power pack is connected

if a USB-B cable is connected

if the Automatic data storage function is active, or with automatic
data transmission
4.4.5 Display illumination
The meter automatically switches the display illumination to energy
saving mode if no key is pressed for 20 seconds.
The illumination is switched on with the next keystroke again.
You can also generally switch on the display illumination (see section
4.4.1).
4.5 Sensor info
You can display the current sensor data and sensor settings of a con-
nected sensor at any time. The sensor data are available in the mea-
sured value display with the [Info] softkey.
1 In the measured value display:
Display the sensor data (sensor name, series number) with
[
Info ].
15.03.2014 08:00 Info