Xylem wtw MIQ/IDS, Руководство по эксплуатации

Страница: 44 / 62

Chlorine MIQ/IDS
44
ba77277d01 01/2024
8.2.3 Calibration result
Possible calibration
results
The externally determined value of the chlorine concentration is evaluated
during input together with the measured reference voltage from the
IQ S
ENSOR
N
ET
.
A chlorine concentration outside the permitted limits cannot be entered.
Calibration history The calibration history contains the data of the active calibration and the chrono
-
logical list with the last calibrations.
The calibration history provides the following information:
8.3 Settings
Making the set-
tings
Using
<S>
, switch from the measured value display to the main menu of the
settings. Then navigate to the setting menu of the sensor. The procedure is
described in detail in the IQ S
ENSOR
N
ET
system operating manual.
8.4 Messages
IDS chlorine sensors do not generate any messages.
Step 3:
After the calibration procedure has been finished the mainte
-
nance condition has to be switched off manually. More detailed
information on the maintenance condition is given in the
IQ S
ENSOR
N
ET
system operating manual.
Date Date of the calibration
Raw Raw value (reference voltage in mV)
Conc. Concentration entered (mg/L)
Setting Selection/Values Explanation
Measuring mode
Concentration (mg/l)
Concentration (ppm)
Measured parameter in the measured value dis
-
play
Sensor
FCML 412 M12-2
FCML 412 M12-20
Select the connected sensor.
The sensor determines the measuring range.
Save and quit - The settings are stored.
The display switches to the next higher level.
Quit - The settings are not stored.
The display switches to the next higher level.