Xylem wtw MIQ/IDS, Руководство по эксплуатации

Страница: 39 / 62

MIQ/IDS Conductivity
39
ba77277d01 01/2024
7 Conductivity
The MIQ/IDS module connects IDS sensors to the IQ S
ENSOR
N
ET
.
Suitable sensors: see section 7.5 A
CCESSORIES
7.1 Measuring
Prerequisites

The IQ S
ENSOR
N
ET
system is in operation
(see IQ S
ENSOR
N
ET
system operating manual).

The sensor is connected to the MIQ/IDS module
(see section 3.7).
7.2 Calibration
7.2.1 General information
Normally, the conductivity measuring cell does not age. Special measuring
media (e.g. strong acids and bases, organic solvents) or temperatures that are
too high may considerably reduce its lifetime or lead to damage.
7.3 Settings
Making the
settings
Using <S>, switch from the measured value display to the main menu of the
settings. Then navigate to the setting menu of the sensor. The procedure is
described in detail in the IQ S
ENSOR
N
ET
system operating manual.
CAUTION
Contact with the sample can lead to danger to the user!
Depending on the type of sample, suitable protective mea
-
sures must be taken (protective clothing, protective goggles,
etc.).
1. Install the sensor in a flow through armature and provide the sample flow.
or
Submerse the sensor in the sample.
The cell constant can be calibrated on an IDS meter (see operating
manual of the meter).