Xylem wtw MIQ/IDS, Руководство по эксплуатации

Страница: 10 / 62

Safety instructions MIQ/IDS
10
ba77277d01 01/2024
2.2 Safe operation
2.2.1 Authorized use
The authorized use of the MIQ/IDS is the provision of IDS interfaces in the
IQ S
ENSOR
N
ET
. Only the operation and running of the product according to the
instructions and technical specifications given in this operating manual is autho
-
rized (see chapter 11 T
ECHNICAL DATA
). Any other use is considered unautho
-
rized.
2.2.2 Requirements for safe operation
Note the following points for safe operation:

The product may only be operated according to the authorized use specified
above.

The product may only be operated under the environmental conditions men
-
tioned in this operating manual.

The product may only be supplied with power by the energy sources men
-
tioned in this operating manual.

The product may only be opened if this is explicitly described in this operating
manual (example: connecting electrical lines to the terminal strip).
2.2.3 Unauthorized use
The product must not be put into operation if:

it is visibly damaged (e.g. after being transported)

it was stored under adverse conditions for a lengthy period of time (storing
conditions, see chapter 11 T
ECHNICAL DATA
).
2.3 User qualification
Target group The IQ S
ENSOR
N
ET
system was developed for online analysis. Some mainte
-
nance activities, e.g. changing the membrane caps in D.O. sensors, require the
safe handling of chemicals. Thus, we assume that the maintenance personnel
is familiar with the necessary precautions to take when dealing with chemicals
as a result of their professional training and experience.
Special user qualifi
-
cations
The following installation activities may only be performed by a qualified electri
-
cian:

Connection of the MIQ/IDS to the power supply.