Xylem WTW DIQ/S 281, Руководство по эксплуатации

Страница: 113 / 132

DIQ/S 281 Outputs
113
ba77244d01 08/2020
6.9.2 Behavior in non-operative condition
An output is non-operative when no function is activated for the output.
An output becomes non-operative in case of
 Power failure
(As soon as the supply voltage is sufficient again, the non-operative condition
of the outputs ends. The outputs function as specified by the user again.)
 Erasing a link to a sensor
 Changing the
Measuring mode
sensor setting for a linked sensor
 Changing the
Measuring range
sensor setting for a linked sensor
Settings in the
non-active
condition
Before editing sensor settings a note appears on the display to
inform you that links will be erased when you change the
Measuring
mode
or
Measuring range
sensor setting.
Current output Relay output
Current: 0 A
Relay: Open