Xylem wtw Cond 7110, Руководство по эксплуатации

Страница: 16 / 44

Operation Cond 7110
16
ba75927e05 12/2017
4.4 Navigation
4.4.1 Operating modes
The meter has the following operating modes:
4.4.2 Measuring mode (measured value display)
The following functions are available in the measuring mode (measured value
display):
• To change the indication on the measuring screen (e.g.
ϰ
<-> Sal <-> TDS
<-> Resistance), press <MODE> .
• To open the measurement settings, press <MODE
_
> (long pressure).
• To open the system settings, press <ENTER__> (long pressure).
4.4.3 Setting mode
The following functions are available in the setting mode:
• To change the current setting, press <

><

>.
• Confirm the setting with <ENTER> .
The next setting is displayed.
The settings are stored.
• Press <MODE> to exit the setting mode.
Operating mode Description
Measuring The measurement data of the connected sensor are
shown in the measured value display
Calibration The course of a calibration with calibration informa-
tion, functions and settings is displayed
Setting A setting is displayed.
When the last setting is confirmed, the setting menu is auto-
matically quit.