9/24
4.4 Configuration language
For configuration of the language do the following steps:
1. Open menu
„general“
2. Select
„language“ and enter the language
Select the position you would like to use by using the buttons
or
Press the
-button to accept and save the entry.
To cancel the input dialogue without saving the value press
+
.
4.5 Configuration off time
You can set the time when the meter switches off automatically. The data logger will continue to log, if it is set in
chapter „Data logger”.
To configuration the off time do the following steps:
1. Open menu
„general“
2. Select
„off time“ and enter the time
Select the position you would like to change by using the buttons
or
and change with
or
.
Press the
-button to accept and save the entry.
To cancel the input dialogue without saving the value press
+
.
4.6 Data logger
The device has an integrated data logger with real-time clock. So it is possible to save the last about 4.000 data
sets
(date, time, main measurement value, second measurement value, temperature).
The saved data can be either displayed directly in the device display or transferred by the USB-interface.
To configuration the data logger do the following steps:
1. Open menu
„general“
2. Enter the time interval in the menu item
„interval“
Select the position you would like to change by using the buttons
or
and change with
or
.
Press the
-button to accept and save the entry.
To cancel the input dialogue without saving the value press
+
.
Data logger Automatic:
If the automatic is switched off, the logger logs only by switched on device. (please note also the off time)
If the automatic is switched on, the logger logs continue. (long time logging)
For correct logger function set the real time clock.
During view the logged data’s the recording is stopped.
