Xylem SonTek FlowTracker2 Скачать руководство пользователя страница 51

Страница: 51 / 308

SonTek – a Xylem brand

FlowTracker2 User’s Manual (January 2019)

Max Depth Change for Warning

0.01

200

Yes

Max Spacing Change for Warning

0.01

200

100

Yes

0.6 Method Depth

100

0.5

m or ft

Yes

Discharge Equation

3.4.4.1

The

Discharge Equation

parameter allows the user to specify what type of discharge

calculation method must be applied in the discharge calculation process.

a) The discharge equation calculation methods supported in FlowTracker2 software

is grouped under the following,

i). Mid-Section Method,

ii). Mean-Section Method,

iii). Japanese Method.

b) The default Discharge Equation applied in FlowTracker2 is Mid-Section.

The Arithmetic methods implemented for calculation of discharge are based on the
following literature,

•

ISO 748 – 2007, Hydrometry - Measurement of liquid flow in open channels using

current meters or floats,

•

WMO-No. 1044, Volume I – Fieldwork, 2010.

•

Japanese Literature

To change the Discharge Equation method

i).

Use the left or right arrow key to scroll through the list of options,

Discharge Uncertainty

3.4.4.2

The

Discharge Uncertainty

parameter allows the user to specify what type of

uncertainty analysis must be applied in the discharge calculation process.

a) The discharge uncertainty analysis supported in FlowTracker2 software is

grouped under the following,

i). ISO 748 - 2007
ii). Interpolated Variance Estimator (IVE)

b) The default Discharge Uncertainty method applied in FlowTracker2 is IVE.

c) The discharge uncertainty analysis was not implemented for the Japanese

discharge equation method.

The uncertainty analysis implemented for determining the overall discharge uncertainty
are based on the following literature,

•

ISO 748 – 2007, Hydrometry - Measurement of liquid flow in open channels using

Содержание SonTek FlowTracker2





















































































































































































































































































































Результаты поиска

Содержание SonTek FlowTracker2

Отзывы:

Бренды по названию

Популярные бренды

Xylem SonTek FlowTracker2, Руководство пользователя

Результаты поиска

Содержание SonTek FlowTracker2

Отзывы:

Бренды по названию

Популярные бренды