Xylem SI Analytics HandyLab 100, Руководство по эксплуатации

Страница: 16 / 60

Operation HandyLab 100
16 ba77062d02 12/2017
4.2.2 Navigation
Measured value display In the measured value display, you can

open the menu for calibration and measurement settings with <F1>
(short keystroke)

open the system menu with the sensor-independent settings by
pressing
<F1> Storage & config for a <F1
_
> long keystroke,
approx. 2 s).

change the display in the selected measuring screen (e. g. pH <->
mV) by pressing
<M> .
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
elements. The selection is made with the
<

><

> keys. The current
selection is displayed with a frame.

Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
<ENTER> . Exam-
ple:

Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
<ENTER> .
Subsequently, the setting can be changed with <

><

> and
<ENTER> . Example:
General
Clock
Service information
Reset
System
15.03.2014
08:00
Back
Language: Deutsch
Illumination
:
On
Contrast
:
50 %
Switchoff time
:
1 h
General
15.03.2014
08:00
Back