Xylem sensus AutoRead Скачать руководство пользователя

Страница: 97 / 161

9 Reports

Reports are listed here alphabetically with notes on whether the report may be printed

automatically, or must be printed from a particular location in AutoRead. Some reports

are common to all protocols while others are specific to only one. The availability of fields

will depend on the selections made at the import level (i.e. the previous read value is

necessary to generate a consumption report, but must be supplied from the billing system

and imported into AutoRead to be available). If user defined fields are chosen on the import

format, they will not be readily available in the reports. A typical example of this is the use of

fields for customer names:
AutoRead's pre-defined Name fields are Last Name, First Name and Middle Initial, which

are made available in the reports. Often an extra field is chosen such as NAME in order to

pick up the complete name, which then is not available in reports. Because of this, there is

a field labeled Additional Information that can be chosen to pick up the name field or any

other user defined field that is desired in the reports. Additional Information is a catchall field

that is available in all reports but can only be used for one field.
A plus sign (+) listed before a Meter ID indicates a non-route meter. A bold (e) listed before a

reading indicates that it is exempt from the export file when LAST is selected. A exclamation

point (!) listed before a reading/note indicates that the reading/note was manually entered

through AutoRead.

Note

: Each time you create a report, the data for the report saves to a .CSV file in the AutoRead

Reports folder using the following naming convention: routename_reportname.csv.

Feel free to contact Sensus AMR Support at 1-800-638-3748 option #2 for assistance in

modifying your reports.

Account List

Available in all protocols and printed only from the

Reports

tab in the Tree View.

The

Account List

report lists information on each meter of a selected route.

Alarm Summary

Available in all protocols and printed either automatically or from the

Reports

tab.

9 Reports | 97

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды