Xylem sensus AutoRead Скачать руководство пользователя

Страница: 95 / 161

The four required fields, Meter ID, Meter Type, Account ID, and Service Address are

displayed at the top of the screen. The MXU ID, if used, is also displayed along with Port

Number, Port Type and Port Channel.
Several tabs display in the middle of the screen: Readings, Notes, Questions, Imported

Data, and Work Order. The

Readings

tab shows the reading(s), date and times, as well as

the reading sequence. The

Notes

tab shows the note code(s) for the account along with

the date and time the note code was entered. If a question was loaded on the HHD, the

Questions

tab shows the question(s), answer(s), and the date and time for each entry. The

Imported Data

tab shows optional imported information such as the multiplier, units of

measurement, register text, displayed text, and the high and low limits. The

Work Order

tab

shows the work performed details on a work order record.

Note

The information in the Imported Data screen is provided by the billing software, and will

not be present if it has not been set up in the interface between AutoRead and the billing

software.

Note

If data has not yet been retrieved from the HHD, there are no readings, notes, answered

questions, or completed work orders listed.

The Route Exceptions Tab

The

Route Exceptions

tab (if available) displays any records in the Import file from the

Billing software that had an exception to the route. Any meters that are removed from

the route are placed in the

Route Exceptions

tab. The AutoRead software removes any

accounts with a route exception from the route at import and therefore before they are

loaded into the reading device. If an exception exists, AutoRead will place a bold (e) next

to the name of the route in the

Process Routes (Global View)

screen to let you know that

exceptions are present.
For more information on Route Exceptions consult Section

7.7

Route Exceptions.

8 Elements of the Process Routes Screen | 95

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды