Xylem sensus AutoRead Скачать руководство пользователя

Страница: 29 / 161

The AR500X Tab

The

AR500X

tab is provided to make changes to the default configuration of the AR5001

and AR5002 HHD. There are settings that are specific to these models that do not apply to

the model 4000 HHDs.
•

Prompt when not matching displayed location

: When enabled, the HHD will display a

dialog box when a reading is received with a Meter ID that does not match the Meter ID

at the currently displayed location. The user will have options to either apply that reading

to the current location, or search for this (AMR) ID within the route.

•

Prompt when not found on route

: When enabled, the HHD will display a dialog box

when a reading received was searched for and was not found anywhere on the route.

The user will have options to either apply the reading to the currently displayed location,

or store the reading and Meter ID as a non-route meter.

•

Enter note on apply

: Only available if one of the

Prompt

option has been checked.

When enabled, if the operator chooses the

Apply

option to store the reading at the

currently displayed location, it will also force a note to be stored with this account. Text

for this note can be entered in the box to the right of this field.

•

Append ECR/Register ID

: This is available once the

Enter note on apply

option has

been selected. If checked, it will automatically append the corrected Meter ID to the

end of your note which allows for easy correction of that account back in the office.A

common use for the above ECR/Register ID matching options is to simplify the process

of fixing incorrect Meter IDs. For example, assume all these options are enabled and

the text

New Meter ID=

is entered in the

Enter note on apply

field. If the meter reader

knows they are at the correct location displayed on the HHD screen and the Meter

ID doesn't match, they can choose the option to Apply, and a note New

Meter ID=

3 Polling Devices | 29

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды