Xylem sensus AutoRead Скачать руководство пользователя

Страница: 24 / 161

3 Polling Devices

The Polling Devices screen lists all the Handheld, Vehicle or PhonRead reading devices

that are configured in the AutoRead application. For example, if a utility has three HHDs,

there should be three devices listed on the

Polling Devices - Handheld

screen. There are

controls provided to add Reading Devices to the system and to configure the properties and

settings of the reading devices individually. There are also tabs provided to change the pre-

defined Notecodes that a meter reader will have access to while reading meters, as well as

settings pertaining to Work Order records.

Configure Polling Devices

•

Add

: The

Add

button allows the user to add a Polling Device in the selected protocol.

The desired protocol (Handheld, Vehicle or PhonRead) must be selected from the Tree

View on the left side of the screen. Once a Polling Device is added, the user is prompted

to set individual parameters for the device.

•

Delete

: The

Delete

button allows the user to delete a Polling Device from the system.

A Polling Device that is currently assigned to a route or loaded with data cannot be

deleted.

• The

Devices

tab: This is the default screen within Polling Devices, and displays a list of

the currently added Polling Devices in the selected Protocol, along with a grid, which

displays certain properties of each device.

• The

Notes

tab: Click here to bring up the list of pre-defined note codes in the selected

protocol. See the section on the

Notes

tab to change the pre-defined list of note codes.

• The

Work Order

tabs: There are three tabs that pertain to Work Order records:

Instructions

: Contains a list of preset work instructions that may be edited in the

same fashion as the

Notes

tab. These instructions serve as the default list that may

be selected from when creating a work order in AutoRead. When one is chosen, it will

appear on the screen of the HHD for that particular Work Order record informing the

operator of what needs done at the selected account. When completing a Work Order

in the HHD, the operator must also specify the Work Performed; these Instructions serve

as the listing from which they must choose.

Parts

: This tab allows for entry of default

part descriptions. While the worker may type their own descriptions into the HHD, having

a preset list to choose from greatly increases speed and accuracy.

Workers

: Provides

3 Polling Devices | 24

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды