Xylem Multi 3620 IDS, Руководство по эксплуатации

Страница: 83 / 114

Multi 3620 IDS Settings
ba77169d06 10/2021
83
11.7 Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
11.7.1 Resetting the measurement settings
pH The following settings for pH measurements are reset to the default settings
with the
Reset
function:
The sensor settings are reset under the
Reset
menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<MENU/
ENTER>
key.
ORP The following settings for ORP measurements are reset to the default settings
with the
Reset
function:
The sensor settings are reset under the
Reset
menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the
<MENU/
ENTER>
key.
Dissolved oxygen The following settings for D.O. measurements are reset to the default settings
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Setting Default settings
Buffer AutoCalTEC
Calibration interval 7 d
Unit for slope mV/pH
Measured parameter pH
pH resolution 0.001
mV resolution 0.1
Asymmetry 0 mV
Slope -59.2 mV
Man. temperature 25 °C
Single-point calibration off
Setting Default settings
mV resolution 0.1
Man. temperature 25 °C