Xylem LOWARA SMB /SVE Series Скачать руководство пользователя страница 7

en 

– Original instructions 

 

Inexperienced users 

 

WARNING: 

FOR THE EUROPEAN UNION 

  This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they 
have been given supervision or instruction concerning use of the appliance in a safe way and 
understand the hazards involved.  

  Children shall not play with the appliance.  

  Cleaning and user maintenance shall not be made by children without supervision. 

FOR OTHER COUNTRIES 

  This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. 

  Children should be supervised to ensure that they do not play with the appliance. 

1.2.3  General safety rules 

 

WARNING: 

  Always keep the work area clean. 

  Pay attention to the risks presented by gas and vapors in the work area. 

  Always bear in mind the risk of drowning, electrical accidents, and burn injuries. 

 

 

DANGER: Electrical hazard 

  Avoid all electric dangers; pay attention to the risk of electric shock or electric arcs 

  Unintended rotation of motors creates voltage and can charge the unit, resulting in death, 

serious injury, or equipment damage. Ensure that motors are blocked to prevent unintended 
rotation. 

Magnetic fields 

The removal or installation of the rotor in the motor casing generates a strong magnetic field. 

 

DANGER: Magnetic hazard 

The magnetic field may be dangerous for anyone wearing peacemakers, or any other medical 
devices sensitive to magnetic fields. 

 

 

NOTE 

The magnetic field may attract metal debris on the rotor surface, causing damage to the same. 

Electrical connections 

 

DANGER: Electrical hazard 

  The connection to the electric power supply must be completed by an electrician possessing 

the technical-professional requirements outlined in the current regulations 

Precautions before work 

 

WARNING: 

  Install a suitable barrier around the working area, for example a guard rail 

  Make sure that all safety guards are in place and secure. 

  Make sure that you have a clear path of retreat. 

  Make sure that the product cannot roll or fall over and injure people or damage property. 

  Make sure that the lifting equipment is in good condition. 

  Use a lifting harness, a safety line, and a breathing device as required. 

Содержание LOWARA SMB /SVE Series
































Отзывы: