1
Micro PRESFIX
Pressurisation Set
Operating, Installation and Maintenance Instructions
EC Declaration of conformity
Xylem Water solutions UK Ltd declare that the Micro Presfix pressurisation set conforms to the:
Requirements of the Machinery Safety Directive 2006/42/EC.
Electromagnetic compatibility (EMC) Directive
2014/30/EU
Conforming to the UK Health & Safety Requirements
2008 No.1597
Water supply (Water fittings) regulations
1999
Code of practice for heating and chilled water systems
BS7074 (parts 1, 2 & 3)
Signed:
Position:
Engineering manager
Date:
13-01-2017
Clive Willmot
t
Introduction
This leaflet contains information to enable the safe installation and operation of the products mentioned above.
The following instructions must be read and understood by all persons responsible for the installation, operation
and maintenance of this product.
Warning Symbols
Safety instructions where noncompliance would affect safety.
Safety instructions where electrical hazard is involved.
Safety instructions where noncompliance could cause damage to the equipment.
Instruction for safe use
This product has been designed for the pressurisation of sealed heating, chilled water and
closed-condenser water systems to the operating conditions shown.
This product should not be installed until this leaflet has been studied carefully.
Handling, transportation and installation of this equipment should only take place with the proper use
of lifting equipment.
This product must be stored in a frost-free dry environment.
Noise Emissions
This equipment operates at a noise level lower than:
70dBA.
Protection degree:
IP54
Ambient temperature:
4-30°C
Maximum system operating pressure:
7 bar
O&M Micro Presfix_Layout 1 29/03/2017 11:15 Page 1
