en – Original instructions
16
e-IXP(A), e-IXPC(A), e-IXPF(A) – Additional Installation, Operation and Maintenance Manual
3.2
Data plate
1.
Pump or electric pump type
2.
Maximum operating pressure
3.
Maximum liquid operating temperature
4.
Full impeller diameter (non-trimmed impellers only)
5.
Manufacturing date + serial number
6.
Product code
7.
Weight
8.
Flow rate range
9.
Minimum liquid operating temperature
10.
Head range
11.
Rotation speed
12.
Reduced impeller diameter (trimmed impellers only)
13.
Electric pump unit absorbed power
14.
Minimum efficiency index
15.
Hydraulic efficiency at the best efficiency point
3.3
Identification code
1.
Series name
2.
Size from 40-25-160 to 600-600-600
3.
Impeller with full [A], reduced [B, C or D], standard [ ] or special [X] diameter
4.
Motor power in kWx10 (370) or, for bare shaft pump only, impeller diameter in mm (324)
5.
Lowara motor [P, L], WEG [W], ABB [A], or other manufacturer's [X]
6.
2-pole [2], 4-pole [4] or 6-pole [6] motor
7.
Frequency 50 Hz [5] or 60 Hz [6]
8.
Standard operating pressure, discharge side, PN 16 bar [B], PN 25 bar [C], class 150 [R] or class 300 [S]
9.
Pump body made of cast ductile iron [D], stainless steel [N], duplex [R], super duplex [T], super-austenitic stainless
steel [U] or other material [X]
10.
Impeller made of stainless steel [N], duplex [R], super duplex [T], super-austenitic stainless steel [U] or other
material [X]
11.
Mechanical seal made of SiC/Carbon/EPDM [4], SiC/Carbon/EPDM for hot water [6], SiC/Carbon/FKM [2],
SiC/SiC/EPDM [Z], SiC/SiC/FKM [W] or other material [X]
12.
Shaft sealing version
13.
Bearing support lubricated with grease [G] or oil [O]
XI
P_M0
00
3_A_sc
1
2
3
4
5
6
8
9
10 11 12 13 14 15
7
XIP_M0004_A_sc
I X P
2 0 0 - 1 5 0 - 3 1 5 A 3 7 0
W 2 5 B D N 2 S 1 G
12
4
5
6
8
9
1
2
3
7
10
11
13
