Xylem Flygt 2075, Инструкция по установке, эксплуатации и обслуживанию, Страница: 12 / 60

Product Description
Products included
Pump model Approvals
2075.324 Standard
2075.590 European Norm
• ATEX Directive
• EN 1127-1, EN 50014, EN 50018, EN 50019
• II 2 G EEx de IIB T3
Canadian Norm:
EMR, only 60 Hz
2075.690 European Norm
• ATEX Directive
• EN 1127-1, EN 60079–0, EN 60079–1, EN 50019
• I M2 Ex de I
Canadian Norm:
EMR, only 60 Hz
International Norm; not for EU member countries
• IECEx scheme
• IEC 60079–0, IEC 60079–1
• Ex dl
Pump design
The pump is submersible, and driven by an electric motor.
Intended use
The product is intended for moving waste water, sludge, raw and clean water. Always
follow the limits given in
Application limits (page 50). If there is a question regarding the
intended use of the equipment, please contact a local sales and service representative
before proceeding.
WARNING:
In explosive or flammable environments, only use Ex- or MSHA-approved pumps.
NOTICE:
Do NOT use the pump in highly corrosive liquids.
For information about pH, see Application limits (page 50).
The warm media (liquid) version has certain operational limitations, which are stated on a
plate on the pump. For applicability, see
Application limits (page 50).
Particle size
The pump can handle liquid containing particles that correspond to the holes in the
strainer.
Product Description
10 Flygt 2075 Installation, Operation, and Maintenance Manual