AHIP6+ Manual
3-4
Option
Description
1, 2
Cylinders
Indicates the number of cylinders on the hard drive. This information is automatically
entered if Type is set to “Auto.”
1, 2
Heads
Indicates the number of read/write heads on the hard drive. This information is auto-
matically entered if Type is set to “Auto.”
1, 2
Sectors
Indicates the number of sectors per track on the hard drive. This information is auto-
matically entered if Type is set to “Auto.”
1
Maximum Capacity
Indicates the maximum storage capacity of the drive.
3, 4
Multi-Sector
Transfers
Sets the number of sectors per block. Options are Auto, 2, 4, 8, or 16 sectors. “Auto”
sets the number of sectors per block to the highest number supported by the drive.
3, 4
LBA Mode Control
Enables Logical Block Access. The default is disabled and should work with most hard
drives.
3
32-Bit I/O
Enables 32-bit communication between CPU and IDE interface.
3, 4
Transfer Mode
Selects the method for transferring the data between the hard disk and system memory.
The drive type and cable length determine available options.
3, 4
Ultra DMA Mode
Enables or disables the maximum storage capacity of the drive.
1 = Visible only when type is “Auto” or “User”
2 = Editable only when Type is “User”
3 = Not visible when Type is set to “None”
4 = Not editable when Type is set to “Auto”
Cache Submenu
Xycom BIOS Setup Utility
Main
Memory Cache
Item Specific Help
Memory Cache:
[Enabled]
If the line item you
Cache System BIOS area:
[Write Protect]
are viewing has
Cache Video BIOS area:
[Write Protect]
specific help, it
will be listed here.
Cache Base 0-512K
[Write Back]
Cache Base 512K-640K:
[Write Back]
Cache Extended Memory
[Write Back]
Cache CC00-CFFF
[Disabled]
Cache D000-D3FF
[Disabled]
Cache D400-D7FF
Cache D800-DBFF
Cache DC00-DFFF
[Disabled]
[Disabled]
[Disabled]
F1
Help
¯
Select Item
-/+
Change Values
F9
Setup Defaults
ESC
Exit
¨
Select Menu
Enter Select » Submenu
F10 Save & Exit
Figure 3-3. Memory Cache Submenu
