XtremeAIR XA41, Руководство по обслуживанию

Страница: 72 / 284

Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page 6 Page date:
Chapter 12 25.09.2018
CAUTION
12-10-05 Engine Oil Change
For the engine oil change intervals, refer to chapter 05-20-00.
To replace the engine oil, refer to chapter 12-10-04 and the newest revision of Lycoming
Service Instruction No.1014.
To replace the engine oil:
1 Remove the cowling.
2 Cut the safety wire that safeties the oil drain plug.
3 Put a container with applicable dimensions below the oil drain plug.
4 Remove the oil drain plug and let the oil drain into the container.
5 Remove the oil screen housing from the engine accessory housing.
Be careful when you find metal particles on the oil pressure screen. Metal particles are signs
of engine damage. Make sure that the oil pressure screen and the mesh are not damaged.
6 Examine the oil pressure screen for metal particles. Clean the oil pressure screen.
7 Install the oil pressure screen to the oil screen housing.
8 Install the oil screen housing to the engine accessory housing with a new gasket.
9 Add the engine oil, refer to chapter 12-10-04.