manualshive.com logo in svg

XtraVac XtraVac860A, Руководство пользователя, Страница: 11 / 49

Поделиться
Скачать
XtraVac XtraVac860A Скачать руководство пользователя страница 11

 

 

10 

3.3 Nitrogen filling time display(C): display the current setting of nitrogen filling time  

(unit: 1/s) 

3.4 Sealing time display(D): display the current setting of sealing time (unit: 0.1/s) 

3.5 Cooling time display(E): display the current setting of cooling time (unit: 0.1/s) 

3.6 Memory release key(F): press key for modifying memory function 

3.7 Memory input key(G): press key for locking memory function 

3.8 Reserved key(H): key reserved for further use. 

3.9 E-stop key(I): make timing function stop, and release the upper lid. 

3.10 Time increase key(J): press key for time adding 

3.11 Time decrease key(K): press key for time reducing 
 

3.12 Sequence of trial run: 

3.12.1 Connect the power. 

3.12.2 Connect the pneumatic source by quick connector.(C-25) 

3.12.3 If the running condition sounds smoothly, it’s clockwise rotating. If there is abnormal 

noise coming out, it’s counterclockwise rotating, and please turn off the machine 

immediately. Then, change the power wires.  

※

Attention: remember to ground the machine.  

3.12.4 Packaging test: 

(A)

 

Test the sealing temperature and adjust the sealing time in accordance with Chapter 3 

page 10(D). 

(B)

 

Test the vacuum degree and adjust the vacuum time in accordance with Chapter 3 page 

10(B). 

3.12.5 If everything is OK, operate the machine according to the instructions in Chapter 4 for 

normal production. 

Содержание XtraVac860A


















































Отзывы:

Нет отзывов