56
E-mail: [email protected]
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES
®
5.3.5.2. NuSet-MiniPG-Config Task Setting
– Switch
DUT
– Switch
Test Type/DUT Description
DUT:
Choose
“
Switch
” from this scroll-down menu to start configuring switch tests.
Media Type
Testing Ports:
Please connect the DUT with
NuStreams-P5G/P9A
’s Switch Ports
with Cat-5
cables according to the
Testing LAN Ports
you set
here.
Media Type:
You can set the connection speed here
with the scroll-down menu.
Link Wait (Minimum):
NuStreams-P5G/P9A will
attempt to establish connection with the DUT and wait
for the minimum time (seconds). NuStreams-P5G/P9A
will keep waiting until the minimum time is met even the
DUT has already responded.
Link Wait (Time Out):
NuStreams-P5G/P9A will
attempt to establish connection with the DUT and wait
for a period of time until time out (second), and
NuStreams-P5G/P9A will not attempt to establish
connection anymore.
VLAN Setting
VLAN Tag:
Add VLAN tags to all packets.
VLAN ID:
VLAN ID.
Test Traffic
Packet Length:
The length of test packets (from
64~1600 Bytes
) transmitting by NuStreams-P5G/P9A.
Test Time:
The duration of time for DUT test.
Learning Time:
NuStreams-P5G/P9A will start sending
send learning packets to the DUT. The DUT will record
the MAC addresses of these packets, and learn the
routing to NuStreams-P5G/P9A.
Test Utilization (%):
The traffic flow ratio of the entire
network, presented in percentage (
1~99
).
Flow Control:
When
Flow Control
is enabled, the transmitting rate will drop if traffic overflow occurs.
Pass/Fail Criteria
Loss Tolerance (pkts):
The acceptable number of
lost
packets
in data transmitting during tests (
0~9999
).
Excess Tolerance (pkts):
The acceptable number of
excess
packets
in data transmitting during tests
(
0~9999
).
Apply Run
Click this button to apply all the settings you
’ve made and save the settings to NuStreams-P5G/P9A.
