VIS-IR Thermography Detector Product Guide
Xtralis
36218_A2
13
Remote LEDs
There is a provision to connect remote LEDs (if available) to the detector using the socket in junction box. The
wiring diagram is shown below:
Figure 12: Remote LEDs Connection to Detector Using Socket in Junction Box
SD Card Installation
The detector can use an optional micro-SD card to save alarm information. The maximum capacity supported
is 256 GB. Use only class A micro-SD cards (SanDisc, Samsung, etc.) and make sure the card is FAT 32
formatted. The data is stored first in-first out (FIFO). The card can save video-clips, pictures and an alarm log.
In the bottom part of the detector, there is a cover that provides access to the SD card slot.
When the cover is removed, you will notice the slot.
Figure 13: Remove Cover to Access SD Card Slot
To mount the Micro-SD Card, follow these steps:
1. Download Windows MiniTool Partition Wizard and install it on the PC,
2. Insert micro-SD card into the PC,
3. Open the MiniTool Partition Wizard,
4. Select
Disk2
,
5. Go to
Partition
and click
Delete
,
