Xtrails ADPRO iFT, Руководство по установке оборудования

Страница: 46 / 76

iFT Series Hardware Installation Manual ADPRO
46 27817_05
l
Use VM22E audio units to connect up to 32 loudspeakers. Install up to 8 VM22E units in cascade:
o
Unit 0 drives speakers 1 to 4.
o
Unit 1 drives speakers 5 to 8…
l
Use the IP audio outputs on your IP cameras with (built-in) speakers. This feature is available with firmware
version XOa 3.02 and above; and for specific camera models only. For more information, see the
Supported IP
Camera List (26742).
l
Use the Axis Network Horn Speaker (C3003-E). Usage is similar to IP cameras with audio out capabilities.
For details, see
Using the Axis IP Horn Speaker on page 49.
You use the XO client software to assign the different speakers to the cameras. For each camera, you can
choose:
l
One output on a VM22 output switcher
l
One or more outputs on IP cameras.
12.2.2 Setup for VM22A
Note
The VM22A audio switcher is only compatible with built-in MIO cards, not with the MIO cards in the
external XO I/O Interface USB modules.
You need a specific cable to connect the VM22A to the XO device.
Connect the cable to the back of the device as illustrated below. Respect the colour code (yellow = STROBE;
white = AUDIO OUT, shield = AUDIO GND, red = CLOCK, and green = DATA).