Doc. 20780_03
15
ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
Planning and Commissioning Manual
5.3.7
Directional Detection
This feature enables monitoring of the detection area in particular directions, in order to
reduce false alarms and to improve the performance of the detector. Movement from right to
left and left to right can be detected in this way.
The following PIR detectors are available as part of the ADPRO PRO range:
PRO-45D
PRO-45DH
PRO-45DH-IP65
5.3.8
Special Detectors
5.3.8.1 No Creep Zone
This feature of the PRO-45Z eliminates the creep zone of 1 m directly under the detector to
zero.
This makes the detector a perfect fit for being mounted on poles especially in corners of the
area to be protected. Fully protected single detector setup without the need for a second
detector covering each other creep zones.This detector reduces the cost of installation, as
there is no need for an additional pole surveillance.
5.3.8.2 IP65/ IP66 Rated Detectors
For very harsh environmental conditions as they may appear at sites located off-shore or
even on-shore. Sometimes it is also necessary to have security devices cleaned on regular
bases, due to the end users operation (sandy or dusty environment). Then often high
pressure cleaning equipment is used.
