background image

 

14 

Doc. 20780_03 

Planning and Commissioning Manual 

ADPRO Passive-Infrared (PIR) PRO Series by Xtralis

 PRO-85 

*) 

 PRO-85H 

*) 

 PRO-85H-IP65 

*) 

 PRO-100 

 PRO-100I 

 PRO-100H 

 PRO-100HI 

 PRO-100HIS 

 PRO-100H-IP65 

 PRO-100IS-IP65 

 PRO-250H 

*) 

These ADPRO PIR detectors have volumetric properties and a narrow angle of aperture. 

5.3.6

 

Surface or Volumetric Detector 

Planning Notes 

 

The key point in monitoring land surfaces rests on the specific nature of the objects; 
depending on that, planning should be for a so-called surface detector or a volumetric 
detector. 

The following, from the extensive range of ADPRO PRO PIR detectors, correspond in terms 
of nominal range, number of zones (‘finger’) and monitoring angle of aperture: 

 PRO-18 

 PRO-18H 

 PRO-18H-IP65 

 PRO-18W 

 PRO-18WI 

 PRO-18WIS 

 PRO-18WH 

 PRO-18WHI 

 PRO-18WH-IP65 

 PRO-30 

 PRO-40 

 PRO-51 

*) 

 PRO-85 

*) 

 PRO-85H 

*) 

 PRO-85H-IP65 

*)

 

*) 

These ADPRO PIR volumetric detectors have curtain-like properties and a narrow angle of 

aperture. 

Содержание 201312










































































































Отзывы: