21
COMPONENT TEST-48V MOTOR DETECTION
This function allows you to do the off-vehicle drive for Audi’s 48V motor module. After the 48V motor is repaired, it does
not need to be tested back on the vehicle. Just connect the power supply and then connect to VCI according to the jumper
diagram. This way, you can achieve one-key start of the motor.
DCDC DETECTION
This function realizes the off-vehicle drive function of the DCDC module. After the DCDC module is repaired, it does not
need to be tested back on the vehicle. After connecting to VCI according to the jumper diagram, you can start the DCDC
by one click.
6. S
PECIAL
F
UNCTIONS
The Scan Tool supports a lot of commonly used special reset functions, allowing you to quickly access your vehicle
system for various scheduled services, maintenance, and reset performance. These functions often eliminate the need to
reset codes after resolving common problems. Since XTOOL is continuously developing, the manual may not include all of
the latest special functions that are available for download. This user manual lists some of the commonly used special
reset services for your reference.
ABS BLEEDING
Anti-Lock Braking System keeps the tires from locking up immediately when there are brakes. Keeping ABS in good
condition can give full play to the effectiveness of the brakes, shorten the braking time and distance, prevent the vehicle
from skidding and tailing during emergency braking, ensure good driving stability and steering maneuverability, and avoid
violent friction between the tires and the ground to reduce tire wear. When the ABS contains air, the ABS bleeding function
must be performed to bleed the brake system to restore ABS brake sensitivity.
ABS Bleeding can be performed in the following cases:
replace the rear brake distributor pump or the front brake distributor pump. 2.
Severe brake fluid shortage
change the brake fluid
The operation guidelines of the ABS Bleeding function are shown as below:
1.
Read the operating instructions and precautions that appear on the screen carefully before performing the operation
to ensure that the equipment and car are in the correct condition
2.
Attach bleeder bottle to the left rear bleeder screw.
3.
Open the left rear bleeder screw.