EX-SDI DVR OPERATION MANUAL
- 3 -
`
PART 1 DVR LOCAL BASIC OPERATION
1 Basic Operation
1.1 HDD Usage
When it's the first time to operate the device, please install HDD before usage.
E-family support 2 SATA hard drives, when the hard drive is connected, place the seams close to the DVR hard
drive interface side.
Note:
if there is an error prompt during active recording function after recording configuration settings are finished
according to the manual, please format HDD. If it show unrecognized HDD, please kindly check the power
consumption of power adaptor whether it reach the consumption in operation with HDD, or check whether HDD have
quality problems.
1.2 USB Connection
E-series two USB interface on the back panel, for a mouse, USB, WIFI module.
1.3
Mouse Operation
When real time monitoring mode, click the left mouse button to access the main menu: If the user has not
logged on to the system, you pop up a password entry box.
During real-time monitoring, click the left button to enter the main menu. If user didn't login yet, pop-up of login
interface will come out.
When the cursor is on the menu icon, click the left button to enter the menu.
Operate some execution controls or change the status of checkbox in motion detection.
When click the combobox, it will pop out a spinner.
During PTZ 3D control, press the left button and drag the cursor to the right corner, it will active zoom in.
function. On the contrary, the oppsite operation will active zoom in function. The effect in user manual is just
for reference. Detailed instructions refer to section 12 in Part 1.
Double click the left button
Operations of select, confirm and open. For example, double-click will playback one recording video.
When real-view monitoring in multi-channel mode, double-click will let one channel shown in full screen.
Then user can recover multi-channel mode by double click again.
Click the right button
During real-time monitoring mode, this operation will pop out right-click menu.
