2 EASY
-3-
LED Buzzer
LED Buzzer
LED Buzzer
FP MODULE
Standby mode
.
1. Put the 6th dip switch of VD
module on.
2.Short circuit the exit button of VD
module.
3.On FP module, press any finger for
5 seconds to enter the management
fingerprint mode.
1.Press finger in the fingerprint
window,the "beep,beep" prompt tone
indicates that the input is successful.
2.Repeat the above operation for 2-6
times
Successfully set as ADD management
fingerprint.
LED Buzzer
(blue)
(purple)
(purple)
(blue)
(1 seconds)
(beep,beep)
(beep)
1.1 Setting ADD Management Fingerprint
