Polaris Ranger 1500 Self-Canceling Turn Signal System
Thank you for purchasing XTC Power Products Automatic Self -Canceling Turn Signal System. Our Easy Install Turn
Signal System is unique from the other kits on the market. This kit is from our Plug & Play
™
product line, no wires
to cut, no crimping with only power, ground and plugs into the OEM Taillight Harness, utilizing the brake lights as
Brake and Turn Signals. Has more fasteners and insulation requiring more time to install, especially the NorthStar
version, so we are unable to show how to disassemble the car to install the kit. Refer to the manual regarding
removing the panels.
Please remember that the Control Module and switches can be mounted in many places, we only give
suggestions. We only interface with the OEM wiring at the Rear Taillights and the Power Busbar.
Please read the instructions fully and familiarize yourself with the components before starting the install.
The diagram below shows the overall system layout.
1.
Remove the Hood and part of the dash cover. Mount the Control Module using the self-tapping screw provided and
mount the horn on the firewall below the Pulse Bar.