PCS-64-PRO Power Control System
Installation Guide
Thank you for purchasing XTC's Power Control System. The kit comes complete with everything needed for installation.
All switch circuit/housings are wired for bottom row lighting for use with optional up-graded Carling lit switches. The
system has six circuits, two 10 amp direct and four 20-amp relayed circuits with Diode protection that reduce voltage
spikes from field collapse, protecting LED lights and other sensitive accessories. The kit includes power wire with a 50
Amp Circuit breaker for overall circuit protection. More installation information can be found at www.xtcinstall.com
Please read the instructions fully and familiarize yourself with the components before starting the install.
Remember that the System can be mounted in other places not shown. The install instructions below is just one of
many places that the system can be installed.
1.
Remove the hood and dash cover and
Disconnect the Battery.
