There’s no official BTS App on iOS or Android for KATANA 50/100/Head/Artist MKII &
I so far, and these amps do not have Bluetooth Module. However, with AIRSTEP Kat
Edition’s magic, you can use BTS for KATANA-AIR to wirelessly edit these KATANA Amp!
Before the steps below, make sure AIRSTEP Kat Edition has been connected to KATANA
Amp, and both of them are power on.
1.
Download BTS for KATANA-AIR iOS:
Android:
Download
2.
Turn on the Bluetooth of your smart device that uses BTS App for KATANA-AIR.
If it is an Android device, please turn on the location, too.
3.
Enter the BTS App, enter the “Bluetooth MIDI Device”, then choose AIRSTEP
Kat in “CONNECT”, click “OK”. After the parameter editing page shows, it
means successfully connected.
The differences in parameters of BTS App and KATANA Amp
The patch differences
For KATANA 50 MKII&I users, because BTS for KATANA-AIR has 6 patches except the
panel, while KATANA 50 only has 4 patches except the panel, the 1-4 patch on BTS App
indicates the CH 1 BANK A to CH2 BANK B of KATANA 50. And the 5-6 patch on BTS App
repeats the 3-4 Patch(CH1 BANK B and CH2 BANK B) of KATANA 50.
