37
Document MT0605P.2018.E
© Xsens Technologies B.V.
MTi User Manual
Table 20: Pin configuration CA-USB-MTi
Functionality
Wire colour
Wire gauge Fischer pin #
USB pin #
10-pins OEM header
GND
Black
AWG26
1
4
4, 8
NC
2
NC
3
Vin
Red
AWG26
4
1
1
NC
5
NC
6
NC
7
USB DP (D+)
Green
AWG28
8
3
9
USB DM (D-)
White
AWG28
9
2
7
CA-MP2-MTi
Cable CA-MP2-MTi allows for full control of the MTi. Hardware synchronization options are available,
as well as easy access to the serial interface. Although the USB connection wires of the CA-MP2-MTi
are connected it is not recommended to use the USB connection as the shielding of the CA-MP2-MTi
cable is not attached to the Molex header. The part number of the Fischer connector is SS 102A059-
130 Gunfire.
Figure 11: Drawing of CA-MP2-MTi