9
www.xsens.com
Bootloader mode (reboot the sensor can
exit this mode)
Fast blink 2 times and a long pause
MCU/battery is overheated during
charging. Charging is stopped to protect
MCU and battery
Blink 8x per second
2.2.4
Charger
The charger is a docking station for 5 sensors and includes a plastic cover shell, along with
a USB power cable. You can open the charger by holding the cover shell and pull out the
docking from the right side.
Each docking slot features an embedded micro-USB port. Sensors can be charged by
plugging them in and out. Another micro-USB port placed on the right side of the Xsens
DOT charger is used to power on and charge all the sensors docked in the charger. To
power this micro-USB port, an adapter of 5V/300mA is enough but we would recommend
using a 5V/500mA adapter (5 sensor loads) based on standard USB 2.0 power supply.
Figure 4: Charger with power cable
2.2.5
Body straps and accessories
1
Xsens provides the
as an attachment method to secure Xsens DOT
on the body. You can place Xsens DOT sensors inside the pocket of strap and wrap the
strap around the segment of interest. This will ensure good adhesion and fewer skin
artefacts. Refer to this
for more information on sensor attachment.
is available as an alternative attachment
method. These are recommended for clinical applications.
2.3
Software
As Xsens DOT serves as a wearable sensor development platform, we provide all the
software needed for different demands. The software package can be download
includes:
•
Xsens DOT Software Development Kit (Android/iOS)
•
Xsens DOT App (Android/iOS)
•
Xsens DOT Server
•
Xsens DOT Data Exporter
•
SDK Documentations (Android/iOS)
1
Xsens DOT attachment solutions will be more diverse and flexible as we continue to improve
